TRIMMING YOUR MAT

Below are instructions on how to properly trim your Grydlmat to fit a 30" or 28" griddle.
Note: Your Grydlmat is non-returnable once it has been trimmed.

INSTRUCTIONS

STEP 1

STEP-BY-STEP

Lay your GRYDLMAT on a large flat surface. Your GRYDLMAT may contain some slight roll due to shipping that will subside over time.

STEP 2

Gather tools needed for trimming. These include a scrap cutting surface, a long straight edge and a sharp razor knife. (A quality pair of scissors may be used, however for best results use razor.)

STEP 3

Identify which trim pattern fits your griddle size. The sizes listed here will fit corresponding Blackstone models and MAY fit other griddle brands. Use a tape measure to confirm your griddle size before cutting. Once GRYDLMAT has been trimmed it is no longer returnable.

STEP 4

Before trimming, be sure to identify the OUTSIDE of the trim guide line. Trim along this side for best fitment results. The raised edge should be left on the mat to assist with rolling debris and moisture.

STEP 5

Secure the cutting surface under the mat as well as the straight edge along the guide line you have chosen for your griddle size.

STEP 6

While using firm, constant, downward pressure on the straight edge, insert the razor* and make one deep continuous cut using the straight edge as your guide.

*Take great care while using sharp objects. GRYDLMAT is NOT responsible for any accidents that may occur from the trimming of our products.

STEP 7

Repeat these steps along all four edges for your chosen GRYDLMAT size.

STEP 8

Your trimming is complete. Remove and discard the excess trim waste. Your GRYDLMAT is now ready to protect your 30" or 28" griddle. Enjoy!